Private, Pegged Parallels
Saturday, December 30th, 2006
I continue to be extremely impressed with the Parallels VM. However, I just
spent an undue amount of time wrestling with Window’s and Parallel’s network
configurations in order to achieve a relatively simple result. In the hope
of sparing someone else out there some wrestling, here’s the scoop:
Goal
Set up a Parallels VM with Windows XP so that it is isolated from
the outside world but network addressable from my mac via a fixed address
(192.168.2.100) and the name ‘parallels.’
Solution
- Set up your parallels VM
- In your VM’s Network Adapter configuration, choose ‘Host-only Networking’ for the emulation mode
- Go to the DHCP tab of the Parallels application preferences. Set the DHCP scope to include the desired address. (I chose start of 192.168.2.1, end 192.168.2.254, subnet mask 255.255.255.0).
- Start the VM
- In Windows, turn off the firewall. (Control Panel | Windows Firewall)
- In Windows, set the local connection to use a static IP. (Control Panel | Network Connections | Local Area Connection | Properties… | Internet Protocol | Properties… | Use the following IP Address: 192.168.2.100)
- In OS X, open a Terminal. Type ‘ping 192.168.2.100′ and make sure you’re getting a response.
- In OS X, etc/hosts isn’t recognized. In order to put a name on that IP, you have to…
- Open Applications/Utilities/NetInfo Manager. Go to ‘machines.’ Create a duplicate of ‘localhost’. Rename it to ‘parallels’. Set ‘ip_address’ to 192.168.2.100. Save and quit NetInfo Manager.
- Back in Terminal, make sure you can ‘ping parallels’.
- Fin!




send me an email
subscribe via RSS